Nova 37 Cutting Board & Butcher Block Oil x 500ml
Nova 37 Cutting Board & Butcher Block Oil contains clear natural food grade oil that nourishes and protects cutting boards and salad bowls. When Nova 37 is dry, it gives a natural matt finish that is resistant to water and spills. Nova 37 can be easily maintained as the timber starts to show signs of drying out; there’s no need to sand the surface, maintenance coats can be wiped on once surface is clean and dry.
₨225.40
Availability: 21 in stock
Description
KEY BENEFITS
- Food-grade formulation
- Nourishes and revitalises timber
- Enhances natural timber appearance
- Water-repellent finish
- Easy wipe-on application
- Maintenance recoating without sanding
WHERE TO USE
- Cutting boards
- Butcher blocks
- Wooden kitchen utensils
- Timber serving boards
- Food preparation timber surfaces
- Decorative kitchen timber accessories
- And many more applications
HOW TO USE
- Ensure timber surfaces are clean, dry and free from dust, grease, wax and contamination
- Stir or shake thoroughly before use
- Product is supplied ready to use and must not be diluted
- Apply using a lint-free cloth or soft brush
- Apply a thin even coat following the timber grain direction
- Work the oil thoroughly into end grain, dry timber areas and porous sections
- Allow the oil to penetrate evenly into the timber surface
- Remove excess material using a clean dry cloth where required
- Additional light coats may be applied to dry or porous timber surfaces
Critical: Nova 37 is designed for interior food-contact timber surfaces and is not suitable for exterior weather exposure, continuous water immersion or structural timber protection. Do not apply to damp or contaminated timber surfaces. Excessive application may result in slow drying or surface tackiness.Â
Tip: Multiple light coats are preferable to one heavy application. Reapply monthly or as required when timber begins to appear dry or loses its natural lustre. Maintenance coats normally do not require sanding.
WHY CHOOSE
- Designed specifically for food-contact timber surfaces
- Helps reduce timber drying and surface cracking
- Easy maintenance and reapplication system
- Non-film-forming natural finish
- Enhances timber grain and colour
- Suitable for repeated maintenance applications
KEY SPECIFICATIONS
- Food-grade timber nourishing oil
- Natural low-sheen finish
- Coverage: 8–10m²/L per coat
- Surface dry: 1–2 hours
- Light handling: 2–4 hours
- Full cure: 4–6 hours
- Warm soapy water clean-up
